Given here is a list of tools I have for sale. The list includes about 20 squares of
various sizes as well as other tools. Many of these tools are duplicates that I have or
groups of squares I have decided not to continue collecting for space reasons. The money
from any sales will not go to save the rain forest or whales but provide me a means
to buy a few more wooden moulding planes. I have grouped some of the squares into sets
that seemed logical to me. The costs given below are without shipping. Shipping is
typically at cost plus a very small handling fee quoted at time of sale after
destination is provided. Sorry but no international sales.
| Picture |
ID# |
Description |
Cost |
 |
CH1 |
Stanley No. 20 Everlasting Bevel Edge Firmer Chisel 1-1/4"
Inch Wide
Back of blade has been lapped flat and honed. Handle has been oiled.
Well used but restored to be great user chisel. |
$65 |
 |
TS1 |
Stanley No. 20 Try-Square 12 inch in length. Lighty
pitted blade with "Stanley in notched rectangle, MADE IN USA, & No. 20 12
IN" (1936 to 1984 BB trademark stamp) |
$35 |
 |
TS2 |
Stanley No. 20 Try Square 10 inch with crisp figured
rosewood handle with STANLEY in Gold on Handle, Blade has a pitted area 1 inch in diameter
beneath the 1 inch mark where the Stanley mark should be. Some rust spots exist on blade.
Still a good user try-square.(1936 to 1984 BB trademark stamp though not visible) |
$12 |
 |
TS3 |
Stanley No. 20 Try Square 10 inch with rosewood handle
that has been oiled, Blade has pitting and the Stanley marker mark is not visible. Not for
a collector but still a fair user at a low price. |
$8 |
 |
TS4 |
Stanley No. 20 Type 1 6 inch with hand stamped numbers.
Only real problem is the handle has a hand hole and a small chip out of one corner. Blade
is in good shape with no rust but discoloration. One small area of pitting 1/4 inch in
diameter. Good user try-square. |
$25 |
 |
TM1 |
Stanley No. 2 Winterbottom's Patent Combined Try & Mitre
Square 6 Inch in length. Marked STANLEY and PAT 2-8-98 on blade. Blade has
discoloration but no rust. Handle has dings and has been oiled. Light owner mark of E.R.
visible. Excellent user try-square. |
$22 |
 |
TM2 |
Stanley No. 2 Winterbottom's Patent Combined Try & Mitre
Square 7-1/2 Inch in length. Marked with "Stanley in notched rectangle, SW
mark & MADE IN USA, & No. 2 7 1/2 IN" on blade. Handle has dings and has been
oiled. Decal on handle 60%. Few spots of light rust. |
$28 |
 |
TM3 |
Stanley No. 2 Winterbottom's Patent Combined Try & Mitre
Square 6 Inch in length. Marked STANLEY and PAT 2-8-98 on blade (Type 3 with O
logo). Blade has discoloration with moderate pitting over 20% of front and 50% of back.
Back of handle has owner mark of "X" and "Z" on front and end.
Rosewood chipped behind brass wear plate. Handle has dings and has been oiled. Blade and
brass in "as found" condition. Still very useable. |
$15 |
 |
BV1 |
Unmarked Rosewood and Brass Handled Bevel. Slight bend
to blade. Blade has surface rust. Highly figured rosewood handle. |
$10 |
 |
PL1 |
Stanley No. 40 Pocket Level with filigree cover marked .
Jappaning is mostly gone and the steel casting is discolored but not rusted. Missing screw
but vial is intact with good bubble. Cover screws appear to be replacements. Silver paint
on cover. In "as found" condition. |
$10 |
 |
PL2 |
Stanley No. 41 Pocket Level with filigree brass cover
marked "STANLEY" & "PAT JUN 28, 96". Jappaning is mostly gone and
the steel casting is discolored but not rusted. Appears to have original screw and vial is
intact with good bubble. Brass cover is bent in slightly at center |
$30 |
 |
PL3 |
Stanley No. 41 Pocket Level with filigree brass cover
marked "STANLEY" & "NEW BRITIAN CONN. U.S.A.". In "as
found" condition. Jappaning is mostly gone and the steel casting is discolored but
not rusted. Appears to have original screw and vial is intact with good bubble. |
$25 |
 |
MG1 |
Stanley No. 77 Rosewood Mortise Marking Gage This gage
is missing one point and the brass shoe. In "As found" condition. Could be
repaired or used for show as is. Marked with a clear Oct 22, 1872 patent date as shown
below. |
$20 |
 |
MG1
(cont.) |
Patent date marking for above item. |
|
 |
LTK1 |
Layout Tool Starter Kit 1 Given here is a set of tools
which can provide a person who is just starting to take up woodworking an opportunity to
obtain a good starting set of layout tools. These tools are made rosewood, brass and steel
by the maker Crown Tools of Sheffield England and are in "NEAR NEW" condition.
The set consists of mortise marking gage, 9 inch try-square (Blueing 100%), and 9 inch
adjustable bevel (Blueing 100%). |
$50 |
 |
LTK2 |
Layout Tool Starter Kit 2 Given here is a set of tools
which can provide a person who is just starting to take up woodworking an opportunity to
obtain a basic starting set of layout tools. These tools are by the maker Frued and Clay
and are in "NEAR NEW" condition. The set consists of single point marking gage
and 6 inch try-square with rosewood and brass handle. (Blueing 100%) |
$25 |
 |
TS5 |
Stanley No. 10 Walnut Inlaid Handled Try-Square 6 inch This
square has been restored. The back of the blade has pitting.
Good user layout tool. Good weight and feel. |
$25 |
 |
TS5
(cont.) |
Rear view of item given above. |
|
 |
TS6 |
Unmarked Ebony and Brass Handled Try Square 6 Inch
.
Typical of English orgin. Handle has a longitudinal crack down the center.
Handle has been repaired by use of a screw. Brass wear plate has one screw at bottom also.
Blade has rust and is pitted |
$15 |
 |
TS6
(cont.) |
View of bottom of handle for item given above. |
|
 |
TSL1 |
Graduated Set of 3 Unmarked Try Squares with Rosewood and Brass
Handles. Set of 3 unmarked try-squares with rosewood hadles and diamond brass
inlays and wear plate. Blade sizes are 4-1/2 inch, 6 inch, and 7 inch.
The 4-1/2 inch try-square has a rosewood handle 4" by 1-1/2" by
1/2" . handle is well worn but smooth to the touch a pleasure to hold. Owner mark of
M.S. Lusk on one side of blade. Blade is in good shape but does have discoloration. Brass
is clean but not overpolished.
The 6 inch size has a 4-1/2 by 1-5/8" by 5/8" rosewood handle in
fairly crisp "As found" condition. Brass is clean but not overpolished. Blade is
in good shape with no significant rust by discoloration. Minor paint splatter on back of
blade and handle. Owner mark of R. Anderson.
The 7 inch size has a rosewood handle whose brass wear strip is held by 5 screws
similar to the Stanley try-squares. Rust has been removed gently from the blade without
the use of abarasives. None the less, the blade is pitted and the top corner is rounded
slightly. |
$35 |
 |
TSL2 |
Set of Two Try-Squares of Graduated Sizes. Consists of
6 inch and 7-1/2 inch sizes. The 7-1/2 inch size has a 8-1/4" by 1-3/4" by 5/8
" rosewood handle with four diamond brass inlays. The 6 inch try-square has a
4-5/8" by 1-5/8" by 1/2 inch rosewood handle with three brass inlays. |
$30 |
| |
|
|
|
 |
BP1 |
Stanley No. 6 Try Plane with Rosewood Handle and Knob.
(SOLD) Made
in England. 3 years old. As New Condition . Original black plastic handles have been
replaced with rosewood handled. |
$70 |
 |
BP2 |
Stanley No. 3C Smooth Plane with Hardwood Handle and Knob.
(SOLD)
Made in England. 3 years old. As New Condition . Corrugated sole. Original black
plastic handles have been replaced with hardwood handled. Sole has been lapped flat and
has a mirror finish. |
$50 |
 |
BP3 |
Stanley No. 3 Smooth Plane with Rosewood Handle and Knob.
(SOLD) Good
for parts maybe. Brass adjustment knob has had piliers taken to it. Rear Handle is a
replacement and has been broken and repaired and is missing tip of tote. Has pitting on
level cap. |
$15 |
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
