Stanley No. 98 Right Handed Side Rabbet Plane
Stanley No. 98 Side Rabbet Plane (Type I) (6)
1898 Catalog Image of No 98 Side Rabbet Plane (2)
1923 Catalog Image of No 98 Side Rabbet Plane (4)
Justus Traut's 1/29/1895 Patent Date On Skate (6)
Features(1): Right handed, detachable and reversible nose piece.Patent(1): Justus Traut's 1/29/1895 (basic design)Manufactured(1): 1896 to 1942Dimensions(1): 4 inches longCutter(1): 1/2 inch wideConstruction(1): Cast iron, rosewood knobFinish(1): Nickel platedUser info(1) A very handy plane for the right handed side of rabbet work. Fitted with a reversible nose for bull nose work, this plane is preferred by many woodworkers over the No. 79.Average Price(1): $50 to $150Notes(1): Type I :(1896 to 1906) Patent date 1/29/1895 stamped on skate and no provision for depth stops. Stanley TM cast in an oval border; model number cast in small type in square border. Type 1a (1907 to 1909) Same as above but now with "T" TM on cutters.Type 2( 1909 to 1921) "V" TM on cutters. Patent date removed from the front pieces of the skate. Model numbers cast in larger type, in notched borders.Type 3 (1922 to 1935) Sweetheart TM on cutter.Type 3a (1929 to 1935 and later) Now equipped with depth stops.Type 4 (1936 and later ) Last type simply has "Made in USA" on cutter.Sharpening(5): The blade is sharpened in essentially the same manner as skew chisels. The need to maintain an accurate skew angle is paramount in a plane such as the No 98, because there is very little room to move the blade laterally on the bed in order to adjust for any errors in sharpening angle. The No. 98 is even more difficult than the skew bladed No. 140 to sharpen because the bed angle is only 7 degrees in combination with the fact that there is virtually no lateral adjustment possible because the blade runs in a machined slot. Lee notes the No. 98 is "one of the toughest sharpening problems of any plane blade" but also notes that low bed angles always present problems because the lower the bed angle, the greater the rotation of the blade on the bed to change depth of cut from one side of the blade to the other. Since the plane has a bevel-up blade, the blade is sharpened at the lowest angle consistent with the wood being worked.
Sources:1. Walter, John . "Antique & Collectable Stanley Tools, Guide to Identity and Value", 2nd Edition, 19962. The Stanley Catalog Collection, 1855 to 1898, The Astragal Press, Mendham, New Jersey3. Wood, Jack P. "Early 20th Century Stanley Tools, Price Guide". Contains reprints of the 1909 and 1926 Stanley Works Tool Catalogs.4. Smith, Roger K., Reprint of Stanley Catalog No 120 originally issued in 1923, "Carpenters' and Mechanics Tools", The Stanley Rule and & Level Plant, The Stanley Works, New Britain, Conn., U.S.A.5. Lee, Leonard, "The Complete Guide to Sharpening", Taunton Press, Inc.,19956. Stanley No 98 Type 1, Tool Collection of Gordon Muster . Very Fine Condition. Nickel is 100%. Owner mark of "W" scratched on body and one of a matched pair (See No. 99). Purchased March 2001 on EBay for $64.
Sources:1. Walter, John . "Antique & Collectable Stanley Tools, Guide to Identity and Value", 2nd Edition, 19962. The Stanley Catalog Collection, 1855 to 1898, The Astragal Press, Mendham, New Jersey3. Wood, Jack P. "Early 20th Century Stanley Tools, Price Guide". Contains reprints of the 1909 and 1926 Stanley Works Tool Catalogs.4. Smith, Roger K., Reprint of Stanley Catalog No 120 originally issued in 1923, "Carpenters' and Mechanics Tools", The Stanley Rule and & Level Plant, The Stanley Works, New Britain, Conn., U.S.A.5. Lee, Leonard, "The Complete Guide to Sharpening", Taunton Press, Inc.,19956. Stanley No 98 Type 1, Tool Collection of Gordon Muster . Very Fine Condition. Nickel is 100%. Owner mark of "W" scratched on body and one of a matched pair (See No. 99). Purchased March 2001 on EBay for $64.